Product introduction
SCR - A carrier has high hydrothermal stability, low reactor ratio and high strength, which is suitable for continuous reforming Pt-based catalyst carrier.
Product technical indicators:
| Item | Unit | SCR-A target |
| Al2O3 | m% | ＞98% |
| BET surface | ㎡/g | 190±10 |
| Pile ratio | g/ml | 0.57±0.02 |
| Crushing strength | N/Each capsule | ≥40 |
| Wear rate | % | ＜4 |
| Particle size distribution | Φ1.6～1.8mm | ＞98% |
| Defect rate | m% | ＜0.3% |
| Sn/ Al2O3 | m% | 0.31±0.03 |
| Si/ Al2O3 | ppm | ＜200 |
| Fe/ Al2O3 | ppm | ＜200 |
| Na/ Al2O3 | ppm | ＜70 |
② SCR - A support is suitable for manufacturing all continuous reforming catalysts.
Product packaging
The special iron barrel is sealed and packed, and the inner layer is made of moisture-proof plastic bags, with a net weight of 100kg/barrel;
Packed in half-ton bags, lined with moisture-proof material bags, net weight 500 kg/bag.
Precautions for storage, transportation and use
I. Pay attention to waterproof and moisture-proof, and prohibit contact with other chemicals and hydrocarbon substances;
II. Do not drop or roll the iron bucket during handling;
III.. When the product is used, the water absorption should be tested correctly to avoid rapid moisture absorption in wet weather affecting the impregnation load.
