Thermal Stability | Up To 1000°C |
---|---|
Surface Area | 200 M2/g |
Size | 1/8 Inch |
Thermal Conductivity | High |
Pore Size | Medium |
Boiling Point | Not Available |
---|---|
Purity | ≥99% |
Density | 0.54 G/cm3 |
Application | Catalyst For 2-ethylanthraquinone Hydrogenation |
Particle Size | 2.2-2.6mm |
Boiling Point | Not Available |
---|---|
Density | 0.54 G/cm3 |
Solubility | Insoluble In Water |
Application | Catalyst For 2-ethylanthraquinone Hydrogenation |
Particle Size | 2.2-2.6mm |
Alumina Content | More Than 99% |
---|---|
Application | Catalyst For Dehydrogenation Of Long Chain Alkanes |
Bulk Density | 0.3-0.4 G/cm3 |
Thermal Stability | Up To 1000°C |
Catalytic Activity | High Selectivity And Conversion Rate |
Temperature Resistance | High Temperature Resistance |
---|---|
Chemical Stability | Acid And Alkali Resistant |
Purity | High Purity |
Specific Surface Area | ≥0.5m²/g |
Application | Catalyst Support |
Application | Catalyst For 2-ethylanthraquinone Hydrogenation |
---|---|
Carrier Material | Alumina |
Storage | Store In Dry Place |
Particle Size | 2.2-2.6mm |
Specific Surface Area | ≥850 M2/g |
Surface Area | 150-170 M2/g |
---|---|
Catalytic Activity | High Selectivity And Conversion Rate |
Application | Catalyst For Dehydrogenation Of Long Chain Alkanes |
Moisture Content | Less Than 1% |
Bulk Density | 0.3-0.4 G/cm3 |
Particle Size | 2 Mm |
---|---|
Alumina Content | More Than 99% |
Pore Size | 10-15nm |
Thermal Stability | Up To 1000°C |
Catalytic Activity | High Selectivity And Conversion Rate |
Fe2O3 Content | ≤0.02% |
---|---|
Moisture Content | ≤1% |
Bulk Density | 0.6-0.65 G/cm3 |
Pore Volume | 0.6-0.8 Cm3/g |
Mgo Content | ≤0.05% |
Particle Size | 2 Mm |
---|---|
Surface Hydroxyl Groups | High Concentration Of Surface Hydroxyl Groups |
Application | Catalyst For Dehydrogenation Of Long Chain Alkanes |
Pore Volume | 0.8-1.2 Cm3/g |
Bulk Density | 0.3-0.4 G/cm3 |